Lojer Modux - Bed Type Plate Details

Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 53
Applied parts in Modux beds. Cross haired area is applied parts area.
Applied part = part of medical electric (ME) equipment that in normal use
necessarily comes into physical contact with the patient for ME equipment or
ME system to perform its function.
Image 56. Applied part area definition in Lojer Modux nursing bed
13.1 Type plate information
Operating voltage
1
2
0
–
240V
~, 50/60
Hz
Enclosure class
IPX 4
Intermittent operation
2
min.
ON
/ 18
min.
OFF
Power input
Electrical
protection class
400 VA
Class
II
Classification of Applied Parts
(acc
ording to EN
60601
-
1
:2006
)
Type BF Applied Part
See Chapter 4.2 Symbols for explanations of symbols used in the type plate.
Image 57. Type plate (Note! Image referential)
The type plate is located on the nursing bed frame at the power cord end.
Weight of accessories
Accessory
Weight
Lifting pole
(101912)
4.3 kg
Lift support (
71100KP
)
3,6 kg
IV pole (60121 or 60122)
1,5 kg
Dining tray (102588, 102589)
3,6 kg
Cushioned r
ail guard (101182PRO)
1,6 kg
Raised side rail (71025KP)
3,4 kg