Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 55
Recycling
A large part of the materials used in the device can be recycled. When the
device can no longer be used, it must be dismantled and recycled appropriately.
Recycling must be performed by a specialized company and the components
of the device must not be disposed of among unsorted landfill waste.
Pre-processing and storage
If the device has a battery, it must be removed at the end of life.
Remove the oils from the hydraulic system and take them to the appropriate
waste processing plant.
The gas spring must be de-pressurized and its oils removed before the metal is
recycled.
Demolition
The materials must be sorted before recycling:
•SCRAP METAL: frame, screws, nails, hinges, springs etc.
ENERGY WASTE (combustible waste): solid wood and other wood-based
materials, chipboard etc., plastics that are not forbidden to burn (PVC -plastic is
forbidden to dispose by burning because it forms hydrochloric acid that corrode
flues and may create very toxic combustion gas.
• SER (electrical and electronic waste): hand-held control, all cables, motors
etc.
• MISCELLANEOUS WASTE: plastic components (wheels), upholstery and
other components, in which the materials cannot be separated. PVC -waste is
delivered separately sorted to waste-station or sorting-station. PVC-plastic is
identified from symbol presented below, material number 03.
• Pre-processed and sorted materials are taken to the appropriate collection
points. Always follow regional instructions and those posted at the collection
points. Recycling reduces considerably the waste in landfills and the soil.
To Next Page
Loading...
