Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 16
middle joint at the bed’s folding point by pushing the pins of the locking
hooks through the bushings. Turn the locking hooks onto the holders
below the sleeping surface (see image 19).
Image 19. Moving the locking hooks
6.4 Installing and uninstalling the side rails
The side rails are removed from their place when the bed is in the transport
position. The side rails must be removed before the bed is placed in the
transport position. Check, that bed and side rails are marked with compatibility
label below.
Image 20. Compatibility label for matching bed model and side rails
To install the side rails:
1. Push the holes at one end of the side rail into the slide pegs at the end of
the bed to which the power cord attaches.
Compatibility
label of side
rails in leg end
bed board.
Compatibility
label of side
rails. Label is
also attached
outside packing
of siderails.
To Next Page
Loading...
