Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 14
6.2 Locking the functions of the bed
The hand control has a mechanical locking feature for locking the functions of
the bed. The locking can be activated by Allen key from back side of the hand
control. The Allen key is included in the beds’ delivery. When using the locking
function make sure the Allen key is left out of patients’ and bystanders’ reach.
Ensure that the locking is activated by testing movement-functions from the
hand control. The hand control has an indicator light on front side for
indicating when the locking feature is activated (see Image 14 and 15).
Image 15. Locking the hand control
6.3 Preparing the nursing bed for use
The Lojer Modux nursing bed is delivered from the factory in the transport
position and must be prepared for use in accordance with the following
instructions. A quick guide with the same instructions is also provided with the
bed.
1. Make sure that there are no unnecessary objects between the bed’s
structures and that there is enough space around the bed to open it.
2. Lock the wheels from the end where the power cord is located (see
section 6.5.1 and 6.5.2).
Image 16. Locking wheels from power cord (head) end of the bed
To Next Page
Loading...
