Lojer Modux - Page 7

Instructions for use Lojer Modux nursing bed / Version 2.5
Copyright © Lojer Oy, 2022 4
2.1 Accessories
The following optional, separately supplied accessories may be added to the
Lojer Modux nursing bed:
 Lifting pole (101912)
 IV pole (60121 or 60122)
 Lift support (71100KP)
 Mattress
 Cushioned rail guard (101182PRO)
 Raised side rail (71025KP)
 Dining tray (102588, 102589)
 Dual locking system for wheels (see Chapter 6.5.2)
Only manufacturer-approved accessories intended for the bed type in
question should be used with the beds.
Acceptance inspection and storage
Check the packaging for damage to ensure the product has not sustained any
damage during transport. Remove all packaging materials, including any
supporting pieces used during transport.
The shipment must include all the items listed on the packing slip. If you notice
any defects or missing items, contact the product’s supplier immediately.
Image 2. Symbols and limit values for transport and storage temperature,
humidity and atmospheric pressure.
The bed must be stored or transported at temperatures between -20
and +50 °C, with relative humidity between 30 and 75 % and
atmospheric pressure 80 kPa to 106 kPa.