LOMI Bloom - Regular Use and Operation; Step-by-Step Usage Instructions

Visit lomi.com/get-started for more info. Lomi Bloom Instruction Manual 1.3 - 8
EN
1. Open lid and remove the bucket
Grab the handle of the Lomi lid and turn counter clockwise until the lid is in the
unlocked position and can easily be lifted o. Take hold of the bucket handle and
pull the bucket straight up.
2. Add waste to the bucket
Refer to “What can I put in my Lomi?” on page 10 for guidance.
3. Add a LomiPod for Grow mode
To fortify your Lomi Earth with benecial microbes, place one LomiPod on top of
your food scraps and add 50ml of water.
4. Place the bucket back into the unit
Insert the bucket by aligning the arrow on the rim of the bucket with the arrow
on the interior of the unit. If the bucket does not t into place, slightly turn the
coupler on the bucket’s bottom and try again.
5. Close the lid
Align the lid’s unlock arrow with the arrow on the Lomi body and turn the
clockwise until the lid’s lock arrow lines up with the arrow on the Lomi body. When
closed properly, it will feel rmly locked in place.
6. Plug Lomi in
The lights will turn on in sequence, and then the WiFi and the selected mode lights
will turn blue.
7. Start a cycle by pressing the button
A blue light will indicate the mode that’s selected. Lomi will default to the last
selected mode. To change modes, hold the button for 2 seconds. Press the button
when you’re ready to start the cycle.
Refer to the “One Button Functions” on page 12 for more information on button
use.
8. Cycle completion
Once the cycle is complete, all modes & cycle phases will light up, and Lomi will beep once. After
30 mins Lomi will return to standby mode with all lights o to save energy.
Please see “How to feed your garden with Lomi Earth” on page 12.
Regular use