42
Check big and small double gear and plate shaped gear
In case damage and abrasion is found, replacement is needed
Install electrical starting gear
Install collar A of plate shaped gear
Install plate shaped gear
Install small double gear and flat washer
Install magneto
Install rotor comp. of magneto
Install fastening bolt of rotor
Bolt fastening torque:（100～120）N·m
Install stator comp. B of magneto
Install fastening bolt A of stator
Fastening torque：（5～7）N·m
Install wire pressing plate of stator
Fasten bolt of wire pressing plate
Fastening torque：（8～12）N·m
To Next Page
Loading...
