LONGER LASER B1 - Page 51

www.longer3d.com info@longer3d.com
48
occurred due to a defect in materials or workmanship.
Part
Warranty Limitation
Motherboard
One-year International Limited Manufacturer Warranty
Motor
One-year International Limited Manufacturer Warranty
LONGER Laser Module
One-year International Limited Manufacturer Warranty
Touch Screen
One-year International Limited Manufacturer Warranty
Power Adapter
One-year International Limited Manufacturer Warranty
Air Pump
One-year International Limited Manufacturer Warranty
Chrome-Plated Rod
Warranty does not apply on normal wear and tear
2020 Profile
Warranty does not apply on normal wear and tear
Coupling
Warranty does not apply on normal wear and tear
Eccentric Nut
Warranty does not apply on normal wear and tear
Bearing
Warranty does not apply on normal wear and tear
L-Shaped Right-Angle Foot Slot
Warranty does not apply on normal wear and tear
Goggles
Warranty does not apply on normal wear and tear
Brush
Warranty does not apply on normal wear and tear
Board\ Acrylic Board\ Stainless Steel
Plate
Warranty does not apply on normal wear and tear
Linear Bearing Wheels
Warranty does not apply on normal wear and tear
GT2 Timing Belts
Warranty does not apply on normal wear and tear
Powder-Coated Aluminum Extrusion
Warranty does not apply on normal wear and tear
Cables & Drag Chain
Warranty does not apply on normal wear and tear
Cosmetic Appearance & Logos
Warranty does not apply on normal wear and tear
Note:
· The warranty does not cover normal, expected wear and tear
caused by using the LASER B1 for its intended purpose.