EasyManuals Logo

Lonking LG833NG User Manual

Lonking LG833NG
134 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #109 background imageLoading...
Page #109 background image
109
5.6USE OF FUEL SYSTEM AND RELATED MAINTENANCE
5.6.1 FUEL TANK
The fuel tank is located on the left side of the cab.
Fuel tank, see right figure:
5.6.2 FUEL TANK CLEANING
Clear the moisture and impurities in the diesel:
1. If the conditions allowed, adding diesel in the tank after 24 hours deposition.
2. Screw the oil outlet bolt at the bottom of the tank every week to discharge the water and
impurities before adding fuel.
3. Adding fuel to discharge the moisture after daily work.
4. Stay for 5 to 10 minutes after adding diesel each time, to let the moisture and impurities
deposition.
5. Loosen the drain plugs at the bottom of the diesel pre-filter, diesel strainer and diesel fine filter to
discharge the moisture and impurities after daily work.
Repeat the above steps till the liquid is discharged.
5.6.3 FUEL OIL LEVEL INSPECTION
1. Drive the loader to the even site, turn off the engine.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Lonking LG833NG and is the answer not in the manual?

Lonking LG833NG Specifications

General IconGeneral
Rated Power92 kW
Max Dumping Reach1, 050 mm
Transmission TypePlanetary power shift
Rated Load3, 000 kg
Travel Speed38 km/h
Tire Size17.5-25
Max. Torque500 Nm

Related product manuals