› created: 2019-06-13 › revised: page: 2 of 2
Quality Certification
Inspection Equipment 4D-Nucleofector™ LV Unit
AXP-1005
Inspection Equipment 4D-Nucleofector™ LV Unit
Test cartridge orientation: External part for handling (A)
and internal part for insertion into cartridge slot (B).
Hereby Lonza Cologne, Germany confirms that this
Inspection Equipment for the 4D-Nucleofector™ LV Unit
has passed a quality control procedure comprising:
Optical check
Mechanical check
Electronic check
Safety Check
Standards
The Inspection Equipment 4D-Nucleofector™ LV Unit was
tested by TÜV Rheinland Product Safety GmbH and found
to be in compliance with the following standards:
− IEC 61010-1
Declaration of Pack Material
For packing materials, no natural wood is used.
For further details regarding technical specifications and
technical standards, please refer to the use instructions
(page 1) or contact your local representative.
Dr. Rainer Hammermann
Head of Quality
To Previous Page
Loading...
