Loop-IP6820 Self Healing Ring NTU
Ethernet Access
2
NTP V4 client
PTP IEEE 1588v2*
Synchronous Ethernet
– Dry contact interface
Two alarm inputs and two relay outputs
Supports point-to-point and point-to-multipoint
applications
– Web-based management via Loop-iNET
– Remote configuration upload/download via
TFTP
– Download firmware upgrades via TFTP
* Future option
Ordering Information
RoHS compliant units are identified by the letter G appearing at the end of ordering code.
SFP optical modules are NOT included. See separate SFP Optical Module brochure.
Main Unit
Model Description Notes
Loop-IP6820-CS-ipp1-ip
p2-iadd1-G
Self-healing NTU Device with 2 SFP (mini-GBIC)
optical housing WAN ports and 6 LAN ports (2
SFP and 4 RJ45). Commercial Series –
Temperature range -10°C to 50°C.
Loop-IP6820-IS-ipp1-ipp
2-iadd1-G
Self-healing NTU Device with 2 SFP (mini-GBIC)
optical housing WAN ports and 6 LAN ports (2
SFP and 4 RJ45). Industrial Series – Temperature
range -20°C to 70°C.
• Replace the ipp1, ipp2,
and iadd1 fields with the
values in the tables
below
Replace ipp1 and ipp2 with your selection for the 1
st
and 2
nd
power supply.
ipp1 = Description Notes
IDC48
Single DC power supply (-48 Vdc: -36 to -72 Vdc)
Temperature range -20°C to 70°C.
IDC24
Single DC power supply (-24 Vdc: -18 to -36 Vdc)
Temperature range -20°C to 70°C.
• Order a second power
module for dual DC power
and backup redundancy
purposes. (Optional)
• The second power supply
must be the same voltage
as the first. ipp2 = ipp1.
• IDC24 does not work with
POE
Replace iadd1 with your selection for an optional integrated daughter card. Otherwise leave field blank.
iadd1 = Description Notes
I4GEPOEA
4 GbE ports, 2 dry contact ports, and PoE (Power
over Ethernet) over 8 LAN ports. Uses PoE option A
pin assignments.
I4GEPOEB
4 GbE ports, 2 dry contact ports, and PoE (Power
over Ethernet) over 8 LAN ports. Uses PoE option B
pin assignments.
• For an explanation of PoE
options A and B, please
see the PoE Pin
Assignments section
below
To Next Page
Loading...