To Next PageTo Next Page
Need help?Do you have a question about the Lopi 864 TV 40K CleanFace and is the answer not in the manual?
General| Model | 864 TV 40K CleanFace |
|---|---|
| Category | Indoor Fireplace |
| Fuel Type | Natural Gas or Propane |
| Heating Capacity | Up to 2, 000 sq. ft. |
| Vent Type | Direct Vent |
| Efficiency | Up to 75% |
| Firebox Material | Steel |
| Heat Output | 40, 000 BTU |
| Ignition System | GreenSmart 2 |
| Log Set Material | Ceramic Fiber |
| Firebox Interior Options | Brick, Ledgestone |
Details on combustion performance and construction requirements for gas space heating appliances.
Alerts users to high surface temperatures and the need for supervision and physical barriers.
Emphasizes qualified installation and adherence to local and national codes.
Specifies that the appliance is not suitable for marine use or as a fireplace insert.
Provides heating capacity and maximum input ratings for Natural Gas and Propane.
Illustrates the overall dimensions of the fireplace unit with key measurements.
Lists necessary items not included with the fireplace for proper installation.
Outlines the general steps for framing, connecting utilities, and finalizing installation.
Details minimum clearances from the fireplace to walls, framing, and other objects.
Guidance for installing the fireplace on a platform, including ceiling clearance.
Description of standard facing where drywall contacts the fireplace side.
Description of submerged facing where drywall butts against non-combustible facing.
Details input pressure requirements for Natural Gas and Propane.
Instructions for connecting a test gauge to input and output ports on the gas control valve.
Step-by-step guide to relocate the gas line connection from the right to the left side.
Discusses factors affecting draft and the use of restrictors for adjustment.
Specifies minimum clearances for vent sections to combustible materials.
Addresses testing at altitudes and potential need for air shutter adjustment.
Lists approved termination types for vertical and horizontal venting configurations.
Details how to connect vent sections, rise requirements, and support.
Explains the purpose of intake and exhaust restrictors for airflow adjustment.
Step-by-step guide to adjusting the exhaust restrictor's position.
Warning about neutralizing acid wash on masonry to prevent permanent tarnish on faceplates.
Diagram showing the placement of all ten logs for the Classic Oak log set.
Instructions for installing the right log, fitting its channel over the grate.
Instructions for installing the left log, fitting its channel over the grate and avoiding burner holes.
Instructions for placing the front ember chunk using its groove over the grate.
Instructions for placing the center left twig, resting in the front left log groove.
Instructions for positioning the right twig over the pin on the right log, resting on the back log.
Instructions for applying rock wool to the burner for glow enhancement, emphasizing thin layers.
Guidance on installing the stepper motor (adjustable regulator) onto the gas control valve.
Steps to remove cover plates and prepare the fireplace for Power Heat Duct installation.
Details on configuring the fireplace top for CoolSmart TV kit installation.
