Reverse Door
9
Tool required: Philips screwdriver, Flat bladed screwdriver, Hexagonal spanner.
y Ensure the unit is unplugged and empty.
y To take the door off, it is necessary to tilt the unit backwards. You should rest the
unit on something solid so that it will not slip during the door reversing process.
y All parts removed must be saved to do the reinstallation of the door.
y Do not lay the unit flat as this may damage the coolant system.
y It’s better that 2 people handle the unit during assembly
1. Unscrew hinge cover.
2. Open the door and unscrew the top hinge. Then take
the door from the cabinet and place it on a soft pad to
avoid damage.
3. Remove the cover and screws at left side and fit them to
right side.
4. Carefully lie down the rear of cabinet on a soft pad.
Remove two leveling feet first. Then unscrew the door
hinge and left foot base.
CAUTION! If there is a screw at left front corner,
remove it before install hinge
Reverse Door
To Next Page
Loading...
Need help?
General