LORD W1 - PROGRAMS

21
Display Designation Description
Spin Programme status
– – – – Rinse Hold Programme status
End End of programme Programme status
Childproof lock • Lightsup:Thechildprooflockisactivated.
• Flashes:Thechildprooflockisactiveandthe
programme selector has been adjusted.
→ “Deactivating the childproof lock”
Prewash Prewash is activated.
→ “Buttons”
Waterplusand
additional rinsing
Washinginagreateramountofwaterandone
additional rinsing is activated.
→ “Buttons”
SpeedPerfect Short wash activated.
→ “Buttons”
———
1
Energy consumption Energy consumption for the selected programme.
• —:Lowenergyconsumption
• —————:Highenergyconsumption
Reminder to clean
the drum
Flashes: Drum is dirty. Run the Drum Clean
programme for cleaning and caring for the drum
and the outer tub.
→ “Cleaning the drum”
: Voltage control
system
Flashes: The automatic voltage control system
detects impermissible voltage drops.
This will pause the programme.
→ “Error code/error message/signal”
Note: The programme will continue when the
voltage is permissible again.
. Voltage control
system
Flashes: The programme has been paused because
of impermissible voltage drops. The voltage is
permissible again and the programme will continue.
→ “Error code/error message/signal”
Note: The programme duration is extended.
Door • Lights up: The door is locked and cannot be
opened.
• Flashes: The door is not closed properly.
• O: The door is unlocked and can be opened.
Tap • Nowaterpressure.
→ “Error code/error message/signal”
• Thewaterpressureistoolow.
E:60 / -2B
1
Error Error code, error display, signal.
→ “Error code/error message/signal”
1
Example