EasyManua.ls Logo

LORD W1 - Cleaning the water outlet hose at the siphon

LORD W1
59 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
39
Cleaning the drain pump
Clean the drain pump in the event of
faults, e.g. blockages or rattling noises.
Emptying the drain pump
Note: Please read the information in the
“Safety and “Preventing material damage
sections to ensure that you use the
appliance safely.
1. Turn o the water tap.
2. Switch o the appliance.
3. Disconnect the appliances mains plug
from the power supply.
4. Open the maintenance ap.
5. Remove the maintenance ap.
6. Slide a suciently large receptacle
under the opening.
7. Take the drain hose out of the holder.
8. CAUTION - Risk of scalding!
Whenyouwashathightemperatures,
the detergent solution gets hot.
Do not touch the hot detergent
solution.
To allow the detergent solution to ow
out into the container, remove the
sealing cap.

Table of Contents

Other manuals for LORD W1

Related product manuals