EasyManua.ls Logo

Lorell Value Series - Product Setup and Support Information; Before Assembly Preparation

Default Icon
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
LLR44308/44309_081104
Page 1 of 63
INSTRUCTIONS:
IF YOU ARE MISSING PARTS OR OTHER CONCERNS PLEASE CALL OUR TOLL FREE
NUMBER: 1-888-436-6881 EXT. 7678
MONDAY – FRIDAY 9:00 AM TO 4:00 PM EASTERN STANDARD TIME
Please provide the following information:
1. Full Name
2. Physical Address do not include P.O. Box as our carriers cannot deliver to a P. O. Boxes
3. Phone Number
4. Model Number
5. Part Number
6. Quantity
7. Reason for the request
Note: Our policy is to send all parts requests normal ground transportation, if your requirements are to have these parts via
overnight/next day, please provide your designated carrier and account number.
Befor
e you begin:
Open, identify and count all parts prior to assembly. Lay out the parts on a non-abrasive surface
such as carpet or blanket. You will need the tools identified below:
1. Phillips Head Screw Driver
2. Flat Head Screw Driver
3. Rubber Mallet (recommended)

Other manuals for Lorell Value Series

Related product manuals