Lorell 59606 User Manual

Assembly Instructions
60" Pneumatic
Height Adjustable Desk
99551/59605/59606/59634/59635/59636/16202/59611/59612
IMPORTANT NOTE:
• Place all laminated parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched.
• Check to be sure that you have all parts and hardware.
• Remove all wrapping materials, including staples and packing straps before you start to assemble.
• Don’t tighten all screws/bolts until all completely assembled.
• Keep all hardware parts out of reach of children.
• It is recommended for 2 persons to complete this assembly.
Two people are required to
assemble and move this model.
1Pc
1Pc
Two people required to remove frame to avoid damage
1Pc
2Pcs
1Pc

Lorell 59606 Specifications

General

Color	Black
Material	Mesh
Product Type	Office Chair
Weight Capacity	250 lbs
Adjustable Height	Yes
Armrests	Yes
Swivel	Yes
Wheels	Yes

Summary

Assembly Steps

Step 1: Frame Preparation

Carefully remove frame and open two legs.

Step 2: Bracket and Leg Assembly

Assemble bracket and legs using 'E' screws and 'I' washers.

Step 3: Side Component Attachment

Assemble 'C' screws on both sides without tightening.

Step 4: Leg Orientation

Attach legs to frame, paying attention to leg direction.

Step 5: Tighten Frame Screws

Tighten all 8 screws from previous steps, 4 per side.

Step 6: Attach Side Supports

Assemble 'L' and 'R' components with 'C' screws.

Step 7: Connect Frame to Top Panel

Connect frame to top panel using 'A' screws and 'B' connectors.

Step 8: Height Adjustment

Adjust height using lever and check for completed assembly.

Important Notes and Safety

General Assembly Precautions

Place parts on a clean surface, check parts, remove packing, don't overtighten.

Maximum Weight Capacity Warning

Do not exceed maximum listed weight capacity to avoid injury or damage.

Support and Getting Started

Customer Support Contact

Call for immediate help with assembly or product information.

Pre-Assembly Preparation

Open, identify, count parts, and lay them on a clean surface.