Lorentz PS21k User Manual

v140822
Sun. Water. Life.
BERNT LORENTZ GmbH & Co. KG Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 7548 - 0, Fax - 29, www.lorentz.de
All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may
differ from actual products depending on local market requirements and regulations.
14
4.2.4 View or modify the control parameters
Operation Operation, data displayed Display (e.g.)
initial status: non-control parameter display
PROG
enter the parameter modification interface
display: parameter PR0
= PR 0
select the parameter to be viewed and edited
display: parameter number
= PR 9
ENTER
confirm the parameter to be viewed or edited
display: parameter value
= 30
edit parameter value = 25
ENTER
confirm the editing and save the new value
display: next parameter number
= PR 10
PROG
quit from the parameter display mode
display: current running data
= 50 Hz
PROMPT: While the controller is in operation, the
parameter settings can only be viewed. The control
parameter cannot be modified until the controller
is stopped.

Lorentz PS21k Specifications

General

Brand	Lorentz
Model	PS21k
Category	Water Pump
Language	English