To Next PageTo Next Page
Need help?Do you have a question about the Lortone LS12? LS12C and is the answer not in the manual?
General| Power Supply | 110 V |
|---|---|
| Category | Saw |
| Type | Saw |
| Blade Diameter | 12 inches |
| RPM | 1725 RPM |
Introduction to the quiet, fully enclosed, professional quality 12-inch slab saw.
Highlights include bench-top design, power screw-feed, welded steel frame, and hinged hood.
Check all received parts against the list to ensure completeness before assembly.
Secure motor to mount, install pulley, and adjust belt tension for proper operation.
Connect motor and saw power cords to control box and grounded outlet respectively.
Use recommended petroleum oil, ensuring proper level for blade lubrication and cooling.
Dress the blade before initial use and periodically to prevent warping or damage.
Instructions on starting the saw, operating the feed, and monitoring for issues.
Procedure for cleaning sediment from the coolant pan and reassembling the saw.
Comprehensive list of all numbered parts for the LS12 model with descriptions.
Detailed illustration of the vise carriage assembly with part number references.
Diagram showing the arbor shaft and related components with item numbers.
Illustrations and part numbers for the gear box and electrical switches.
Failure to follow instructions can result in injury or machine damage.
Use only specific petroleum oil; avoid water, solvents, or vegetable oils.
