Before you fold the loom again,
you have to pull all the toggles
down, so all shafts are lifted.
If there is a warp on the Jane, you
have to release the tension by
taking the ratchet out of the
ratchet wheel on the cloth beam.
Remove the black star knobs that
lock the loom in its folded position.
Lift the loom at the front while you
fold it.
Make sure the star knobs are
removed completely to prevent
damage to the slot in the beater
supports.
Lock the Jane in its folded position
by screwing the black knobs onto
the threaded ends located in the
hole in the beater supports.
To Next Page
Loading...