Lovatic SpaEase 200 User Manual

SPAEASE 200 INSTALLATION INSTRUCTIONS
Hot Tub Cover Lifter
D
E
F
B
L
D
A
L
C
C
2 Toelles Road, Suite 13, Wallingford CT 06492
Phone: 860-469-2580 Fax: 203-651-1461
www.HotTubProducts.com
IMPORTANT – FOR SWIM SPAS ONLY
Installing the SpaEase 200 on Swim Spas that include multiple
covers is no different than a traditional hot tub with a few small
changes. In Step 4 (“Positioning Cover on Spa”) include all
covers of the Swim Spa in their presumed final position. Make
certain that all covers are pushed firmly together. Select either
side to install the first lifter. When first is complete, put it in the
down position and reposition the second cover, again firmly
against the first cover, and then install second cover.
NOTE: The SpaEase 200
can be easily converted
to a VacuSeal Cover &
Lifter System with the
purchase of a VacuSeal
Conversion Kit (VCK)
and a VacuSeal Cover.
FOR TECHNICAL ASSISTANCE ON INSTALLATION PLEASE CONTACT US AT INFOMATION BELOW

Lovatic SpaEase 200 Specifications

General

Model	SpaEase 200
Brand	Lovatic
Category	Spa Accessories
Weight	2.5 lbs
Dimensions	12 x 8 x 4 inches

Summary

SpaEase 200 Components and Tools

Parts List

Lists all components included with the SpaEase 200 lifter system.

Tools Required

Lists essential tools needed for the installation of the SpaEase 200.

Installation Pre-Checks and Requirements

Spa Compatibility and Clearance

Checks spa suitability and necessary space for installation.

Mounting Support and Surface Preparation

Verifies structural support and prepares cabinet surface for bracket attachment.

Mounting Bracket and Cover Plate Installation

Attaching the Mounting Bracket

Secures the main mounting bracket to the spa cabinet using wood screws.

Installing the Cover Plate

Attaches the cover plate over the mounting bracket with machine screws.

Cover Support Arm Assembly

Swing Arm and Crossover Bar Setup

Assembles swing arm, crossover bar, and extension tube for cover support.

Positioning and Installing Second Side

Places cover and installs second swing arm and related components.

Finalizing Lifter Structure and Support

Securing Crossover Bars and Handle

Fastens crossover bars and installs handle for cover manipulation.

Installing Ball Studs and Gas Springs

Attaches ball studs and gas springs for smooth cover lifting.

Finishing Touches and Optional Security

Protective Covers and Straps

Installs protective sleeves, plastic covers, and locking straps for durability and security.

Optional Lifter Lock System

Details installation of the optional locking system for added safety.