To Next PageTo Next PageWhy is my LoveGo Medical Equipment beeping with both green and red lights on?
The beeping alarm with solid green and red lights indicates a System HOT Shut Down. This means the concentrator's temperature is too high, causing oxygen production to stop. Ensure the bottom outlet vents are not blocked to allow proper airflow. If the problem continues, use a backup oxygen source and contact your equipment provider.
What to do if my LoveGo Medical Equipment alarm beeps but the LCD display is off?
If the alarm is beeping but the LCD display isn't lit, the issue may be with the power supply. First, check the AC power supply connection to ensure it is properly connected. If you're using DC power, verify the battery connection and the connection at the cigarette lighter.
Why is the yellow light on my LoveGo G3 Medical Equipment solid for more than 5 minutes?
A solid yellow light for more than 5 minutes indicates that the oxygen purity is low, meaning the concentrator is producing oxygen at a low level (less than 82%). Contact your equipment provider for assistance.
What does it mean if the red light on my LoveGo Medical Equipment stays on for more than 5 minutes?
A solid red light for more than 5 minutes indicates low oxygen purity, specifically that the concentrator is producing oxygen at a low level (less than 72%). Contact your equipment provider.
General| Brand | LoveGo |
|---|---|
| Model | G3 |
| Category | Medical Equipment |
| Language | English |
Explains the color codes for oxygen purity levels (Green, Yellow, Red).
Warning against bathing use, submersion, and reaching into water.
Caution against smoking, open flames, and petroleum products near the unit.
Do not open cabinet; turn off and disconnect power before maintenance.
Solutions for alarms, no display, and low oxygen purity indicators.
Troubleshooting for power-on issues, no breath alarms, and humidifier use.
