EasyManua.ls Logo

Lovfeel F156 - Wall Mount Your Frame

Default Icon
31 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
A: Power Button
Turns the digital frame on or puts it into standby. Long press around three seconds for turning on/off,
short press for standby.
C: Headphone/Speaker Port
Connect your headphones or speakers.
D: USB Port
Import photos to the digital photo frame from a USB drive (max 128GB).
B: SD/SDHC Card Slot
Import photos to the digital photo frame from a SD/SDHC card (max 128GB), of which 64G and 128G
only support NTFS format.
E: Mini USB port
For after-sales service only.
F: Power adapter DC input(12V)
Plug in the power adapter for power.
G: Loudspeakers
Built-in loudspeaker.
H: Removable bracket slot
Plug in the the bracket and slide up to lock into place.
5 WALL MOUNT YOUR FRAME
You have two ways to mount your frame on the wall.
1Drill two screws on the wall, leave a 10mm gap between the wall and the head of screw. Mount the frame onto
the screws by wall mount hole and slide down to lock into place.
2Prepare a VESA mount bracket. Lock the VESA mount bracket into the VESA holes on the back side of the frame.
Then you can hang the frame on the wall.