To Next PageTo Next Page
Need help?Do you have a question about the Lovibond Scuba+ and is the answer not in the manual?
General| Brand | Lovibond |
|---|---|
| Cyanuric Acid Range | 0 to 160 mg/L |
| Alkalinity Range | 0 to 300 mg/L |
| Power Supply | 2 x AAA batteries |
| Display | LCD |
| Dimensions | 145 x 70 x 45 mm |
| Weight | 200 g |
| Light Source | LED |
| Detector | Photodiode |
| IP Rating | IP67 |
| Parameters Measured | Chlorine, pH, Cyanuric Acid, Alkalinity |
| Chlorine Range | 0.0 to 6.0 mg/L |
| Battery Life | Approx. 1000 measurements |
| Operating Temperature | 0 to 40 °C |
| pH Range | 6.5 to 8.4 pH |
Includes switching on, selecting tests, preparing the sample chamber, and taking readings.
How to perform a new zero calibration for the instrument.
Details on measurement ranges, accuracy, light source, and battery life for the Scuba+.
Guidelines for keeping the instrument clean and in good condition.
Addresses common problems and their resolutions, including tablet usage.
Instructions for fitting a new 9-volt battery, including O-ring checks.
Explanation of error codes such as H₁, L₀, E 01/E 03, E 20, and E 70-E 80.
