Need help?Do you have a question about the Lovibond SWIMTEC MD100 and is the answer not in the manual?
General| Measurement Method | Photometric |
|---|---|
| Display | LCD |
| Power Supply | 4 x AAA batteries |
| Waterproof | IP68 |
| Parameters | Chlorine, pH, Cyanuric Acid |
| Light Source | LED |
| Detector | Silicon photodiode |
| Dimensions | 155 x 75 x 35 mm |
| Weight | 260 g |
| Type | Portable |
| Range pH | 6.5 - 8.4 pH |
| Measurement Range | Depends on parameter |
| Resolution | 0.01 for Chlorine, 0.1 for pH |
| Range Chlorine | 0.01 - 6.0 mg/L |
| Operating Temperature | 0 - 40 °C |
General safety warnings and operational cautions for the instrument.
Guidelines for proper disposal of used batteries and electrical equipment.
Best practices and tips for accurate photometric measurements.
Important considerations before performing analytical methods.
Instructions on correct vial filling, positioning, and adapter use.
Procedure and precautions for replacing instrument batteries.
How to switch on, select modes, and perform basic operations.
Information on display backlight and recalling stored data.
Using the countdown function for reaction time measurements.
Procedures for chlorine determination using VARIO powder and tablets.
Procedures for measuring pH, Alkalinity, and Calcium Hardness.
How to navigate and select options within the instrument's menu.
Recalling and transmitting stored measurement data.
Procedure for setting the instrument's date and time.
Guide to performing user calibration and resetting factory settings.
Explanations of messages displayed during normal operation.
List and explanations of error codes for troubleshooting.
To Next Page