Need help?Do you have a question about the Lovibond MD100 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Type | Portable Photometer |
| Wavelength Accuracy | ± 1 nm |
| Operating Temperature | 0 – 40 °C |
| Auto - OFF | Yes |
| Measurement Range | Varies depending on parameter |
| Accuracy | Varies depending on parameter |
| Light Source | LED |
| Sample Volume | 10 ml |
| Parameters | Multiple (depends on the model) |
| Optics | High-quality interference filters |
Procedural guidelines for obtaining accurate photometric measurements, including vial handling and cleaning.
Instructions for correct vial positioning, filling, and battery replacement procedures.
Step-by-step guide for operating the instrument, including power and mode selection.
Functions for display backlight, recalling stored data, and countdown timer usage.
Procedure for measuring Bromine concentration using tablets.
Procedure for measuring free and total Chlorine concentration using tablets.
Procedure for measuring Aluminium concentration using VARIO Powder Pack.
Procedure for measuring low range Iron concentration using liquid reagent.
How to navigate instrument menus, set date/time, and manage stored data.
Steps for performing user calibration and understanding calibration modes.
Guide to resetting the instrument to its original factory calibration settings.
Detailed technical specifications of the instrument, including accuracy, dimensions, and power.
Information on ambient operating conditions, waterproofing, and CE conformity.
Explanations for common operating messages like 'Hi', 'Lo', and 'btLo'.
List and meaning of various error codes encountered during instrument operation.
To Next Page