GB
Technical Data
Technical Data
Instrument triple wavelength, automatic wavelength selection,
direct reading colorimeter
Light source: LEDs, interference filters (IF) and photosensor in transparent
cell chamber. Wavelength specifications of the IF:
430 nm
= 5 nm
530 nm
= 5 nm
610 nm = 6 nm
Wavelength accuracy ± 1 nm
Photometric accuracy* 3% FS (T = 20° C – 25° C)
Photometric resolution 0.01 A
Power supply 4 batteries (AAA/LR 03)
Operating time 17hr operating time or 5000 test measurements in
continuous mode when display backlight is off
Auto-OFF automatic switch off
15 minutes after last keypress
Display backlit LCD (on keypress)
Storage internal ring memory for 16 data sets
Serial Interface IR interface for data transfer
Time real time clock und date
Calibration user and factory calibration
resetting to factory calibration possible
Dimensions 155 x 75 x 35 mm (LxWxH)
Weight approx. 260 g (incl. batteries)
Ambient conditions temperature: 5– 40°C
rel. humidity: 30–90% (non-condensing)
Waterproof floating; as defined in IP 68 (1 hour at 0.1 meter)
CE Certificate for Declaration of CE-Conformity
at www.lovibond.com
*measured with standard solutions
To ensure maximum accuracy of test results, always use the reagent systems
supplied by the instrument manufacturer.
To Next Page
Loading...
