Product Identification
2 Product Identification
Product nameplate
The product nameplate is an important mark used for effective
identification. It is located on the left side of instrument desk in
the cab of tractor. When the tractor runs in service, the
responsible person will check this nameplate. Do not lose
product nameplate, and keep it clear.
1
Fig. 2-1 Product nameplate
1. Product nameplate
Engine information
T
he product nameplate of engine is an important mark used for
effective identification of tractor power supporting device. It is
located under tractor guard hook. T
equipped on the engine. W
hen the tractor runs in service, the
responsible person will check this nameplate. Do not lose product
nameplate, and keep it clear.
1
Fig. 2-2 Engine nameplate
1. Engine nameplate
Machine model and manufacturing number
When the tractor is shipped out of factory, machine model and
ex-factory manufacturing number is marked on the left side of
transmission gear housing, as shown in right Fig. 2-3.
1
Fig. 2-3 Manufacturing number
1. Manufacturing number
15
To Next Page
Loading...
