To Next PageTo Next PageWhat to do if my LOWES Project Source 67210-0201 have an inconsistent water-flow pattern?
If your LOWES Kitchen & Bath Fixtures have an inconsistent water-flow pattern, the aerator might be dirty or not fitting correctly on the faucet. Try unscrewing the aerator and checking the rubber washer, or consider replacing the aerator.
Why is there a leak under the handle of my LOWES Kitchen & Bath Fixtures?
A leak under the handle of your LOWES Kitchen & Bath Fixtures may be due to a damaged cartridge. Remove the handle and replace the cartridge, seats, and springs to resolve this issue.
General| Brand | LOWES |
|---|---|
| Model | Project Source 67210-0201 |
| Category | Kitchen & Bath Fixtures |
| Language | English |
Critical safety instructions and important checks before installation to ensure compliance.
Ensuring all parts are present and comparing them with the package contents list before assembly.
Procedure to turn off the water supply and remove the old faucet before installation.
Steps for mounting the faucet onto the sink, including tightening mounting nuts.
Instructions for connecting faucet connectors or coupling nuts to water supplies.
Steps for checking leaks and verifying proper operation after installation.
Guidelines for cleaning the faucet surface using mild soap and water.
Common problems, possible causes, and corrective actions for faucet issues.
Details of the faucet warranty, exclusions, and conditions for claims.
List of available replacement parts with part numbers and quantities.
