To Next Page
D
Devin AcostaJul 28, 2025
What to do if Lowrance Active Imaging 3-IN-1 data is not displayed?
- JJamie SmithJul 28, 2025
If the Lowrance Transducer data is not displayed, first ensure that the unit software is compatible. Then, check that the transducer cable is correctly connected to the display unit or sonar module, and that it's also connected to the display unit. Verify that the sonar is enabled in the display unit (refer to the display unit Operator manual for instructions). Finally, make sure the transducer is submerged in the water.
General
