Need help?Do you have a question about the Lowrance StructureScan and is the answer not in the manual?
General| Temperature Sensor | Yes |
|---|---|
| Frequency | 455 kHz / 800 kHz |
| Cable Length | 20 ft |
| Compatibility | Lowrance HDS Gen2, Gen3, Carbon, Elite Ti, Hook2 |
| Mounting Type | Transom Mount |
Explanation of Sidescan, broadcasting sonar beams to the sides of the boat for structure and terrain viewing.
Steps to enable Downscan Overlay by navigating through the MENU, Sonar, and Overlay Downscan options.
Instructions for adjusting the range of the sidescan image or downscan water column section.
Details on selecting between 455 kHz and 800 kHz frequencies for StructureScan.
Adjusts sensitivity near the surface to reduce clutter from wave action or boat wakes.
Controls the orientation of the sidescan/downscan display based on transducer installation.
Steps to measure the size of underwater objects and distances between points on the display.
Instructions for saving waypoints by activating the cursor and selecting the option from the MENU.
Common troubleshooting tips for issues like StructureScan not displaying or no data.
To Next Page
