14
To view history:
From a StructureScan page, press the keypad down (Sidescan) or 1.
to the left (Downscan and Sonar). The blue history tracking bar will
appear helping you keep tabs on where you are in the history log.
To return to normal operation, press 2. EXIT.
Save Waypoints
You can save waypoints using both Sidescan and Downscan views, allowing you to
mark a desired object/location so you can revisit it later.
To save a waypoint:
Press the keypad to activate the 1.
cursor.
Move the cursor over the desired 2.
object/location and press MENU.
Select 3. New Waypoint at Cursor
and press ENTER.
Blue history tracking bars
NOTE: You can save a waypoint by moving the cursor into the desired
position and pressing Enter or the Wpt key from the StructureScan or
Sonar pages.
To Next Page
Loading...
Need help?
General
