Need help?Do you have a question about the Lowrance HDS series and is the answer not in the manual?
General| Waterproof Rating | IPX7 |
|---|---|
| Display Size | 7", 9", 12", 16" (varies by model) |
| Sonar Type | CHIRP, DownScan, SideScan |
| Frequency | 50/200 kHz, 83/200 kHz |
| GPS | Internal GPS antenna |
| Networking | NMEA 2000, Ethernet |
| Touchscreen | Yes (varies by model) |
| Operating Temperature | 5°F to 131°F (-15°C to 55°C) |
| Compatibility | various transducers |
| Display Resolution | Varies by model (e.g., 800x480, 1280x800) |
Critical safety advice, operational warnings, and guidelines for using the HDS system.
Guidelines for selecting an optimal and safe location for the HDS display unit.
Procedures for installing a Skimmer transducer through the boat hull.
Procedures for installing a Pod transducer through the boat hull.
Ensuring correct alignment and attachment of the transducer to the hull.
Guidance on testing transducer performance and making adjustments.
Detailed steps for epoxying a Skimmer transducer to the inside of a boat hull.
Steps for epoxying a Pod transducer to the inside of a boat hull.
Instructions for mounting a Pod transducer onto a trolling motor.
Essential rules to follow for proper and reliable HDS system cable management.
Description and wiring diagram for the HDS Power/Data cable.
Wiring details for NMEA 0183 communication ports on HDS units.
Instructions and diagram for setting up an NMEA 2000 network.
Configuring the HDS for optimal sonar performance based on transducer and fishing conditions.
To Next Page
