Need help?Do you have a question about the Lowrance Elite-5x HDI and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Display Resolution | 480 x 480 pixels |
| Display Type | Color TFT |
| Sonar Frequencies | 83/200 kHz, 455/800 kHz |
| Voltage | 12V DC |
| GPS | No |
| Chartplotting | No |
| Waterproof Rating | IPX7 |
| Sonar Type | Broadband Sonar, DownScan Imaging |
| Power Output | 250W RMS |
| Operating Temperature | -15°C to 55°C (5°F to 131°F) |
| Storage Temperature | -4°F to 149°F (-20°C to 65°C) |
| Dimensions | 6.9" x 5.4" x 2.5" |
Details the function of each physical button and control element on the unit.
Provides initial steps for unit operation, including turning on/off and adjusting backlight.
Introduces the two primary sonar technologies supported by the unit.
Guides users through the initial unit setup process upon first use.
Explains how to navigate and switch between different display pages like Sonar and DownScan.
Describes how to access and use menus specific to sonar and DownScan pages.
Details the process of accessing the main settings menu for unit configuration.
Explains how to select menu options and submenus using the keypad and ENTER.
Explains different menu types like scrollbars, on/off features, and dropdowns for adjustments.
Describes how dialog boxes are used for user input and information display.
Provides instructions on how to input text using the unit's on-screen keyboard.
Covers pre-set sonar configurations optimized for various fishing conditions.
Explains how the keypad controls the cursor for navigating the display and reviewing history.
Describes the activation of advanced features and settings for expert users.
Details how to reset unit options and settings back to factory default values.
Explains how to put the unit into a low-power standby mode to conserve battery.
Describes the display of the water column, showing sonar returns from right to left.
Details the display of the water column using DownScan sonar technology.
Explains the unit's pre-configured split-screen views combining different sonar data.
Covers selecting and displaying additional data like depth or speed on sonar screens.
Explains how to adjust panel sizes and arrange pages in split-screen views.
Details how to select, add, remove, and position overlay data on the screen.
Explains how to access and navigate the menu for DownScan settings.
Describes how to review past sonar history by scrolling backward on the display.
Guides users on making adjustments to contrast and other settings within the DownScan menu.
Explains how contrast affects the visibility of objects against the background in DownScan.
Details the automatic contrast adjustment feature for optimal DownScan viewing.
Explains how range settings define the depth section displayed on the DownScan screen.
Allows users to define specific depth sections to view or exclude from DownScan.
Explains the impact of transducer frequency on DownScan resolution and depth coverage.
Describes how ping speed affects DownScan sonar performance and interference.
Covers settings like noise rejection, surface clarity, color, and split zoom for DownScan.
Explains how surface clarity reduces clutter near the surface in DownScan.
Details signal processing techniques to filter out unwanted noise in DownScan.
Allows switching the DownScan display to a split zoom view for detailed analysis.
Explains how to select color palettes for different fishing conditions in DownScan.
Pauses DownScan sonar transmission for closer examination of targets.
Allows selecting data to be displayed on top of the DownScan page.
Describes reviewing recent sonar history by moving the cursor left.
Explains how to access and navigate the menu for Sonar settings.
Guides users on making adjustments to Sensitivity and Colorline from the Sonar menu.
Controls the level of detail shown on the Sonar display, affecting screen clutter.
Separates strong sonar echoes from weak ones for better object identification.
Automatically sets Sonar sensitivity for optimal performance under most conditions.
Selects the deepest range shown on the Sonar display for water column analysis.
Allows defining specific depth sections to view or exclude from the Sonar display.
Controls transducer frequency for optimal Sonar resolution and depth coverage.
Adjusts the rate of sonar wave transmission to reduce interference.
Covers settings like noise rejection, surface clarity, and color palettes for Sonar.
Reduces surface clutter by decreasing receiver sensitivity near the surface in Sonar.
Displays the amplitude of the most recent sonar echo.
Switches the Sonar display from full screen to a split screen view.
Displays fish echoes as symbols instead of arches in Sonar.
Allows changing the Sonar display's look using color/brightness palettes.
Adjusts DownScan overlay settings like frequency, noise rejection, and clarity on the Sonar page.
Pauses Sonar transmission to examine suspended targets or prevent interference.
Allows selecting data to be displayed on top of the Sonar page.
Restricts depth search capability for smoother scrolling with bottom depth variations.
Adjusts settings for both conventional and DownScan sonar modes from the Sonar Settings menu.
Enhances performance with pre-set sonar configurations for fishing conditions.
Resets selected fishing mode settings to their default values.
Accesses installation and configuration settings for the unit's hardware.
Calibrates depth readings by accounting for the transducer's position relative to the keel.
Calibrates the paddlewheel speed sensor using GPS data.
Calibrates the transducer's temperature sensor for accurate temperature information.
Selects the correct transducer model attached to the unit for optimal sonar performance.
Accesses installation and configuration settings for the unit.
Adjusts unit settings like language, audio volume, and advanced mode.
Selects the language used for menus and text boxes on the unit.
Adjusts volume and controls unit audio feedback like key beeps and alarm sounds.
Enables features and settings accessible only when the unit is in Advanced Mode.
Switches the unit back to its default factory settings for all options.
Displays software information about the unit, including version and update details.
Enables alarms and allows selection of alarm thresholds for different conditions.
Allows selection of the units of measure for distance, speed, depth, and temperature.
Selects NMEA 0183 sentences for connection with VHF radios or other NMEA 0183 devices.
Simulates sonar activity for practice and feature familiarization without live data.
Provides general physical dimensions, display, and waterproof specifications.
Lists technical specifications related to sonar performance, depth, frequency, and speed.
To Next Page