Need help?Do you have a question about the Lowrance Elite-5x and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Resolution | 480 x 480 pixels |
| Power Output | 250W RMS |
| Backlighting | LED |
| Display | Color TFT |
| GPS | No |
| Chartplotting | No |
| Water Rating | IPX7 |
| Frequency | 83/200 kHz |
| Maximum Depth | 1000 ft (305 m) |
| Transducer | Included |
| Sonar Type | Broadband |
| Operating Voltage | 10-20 V DC |
Controls backlight level and turns unit on/off.
Controls cursor and selects items on menus.
Opens settings, context, and page menus.
To turn on/off, press and hold the LIGHT/POWER key for three seconds.
Appears when the unit is turned on for the first time; can be restarted by restoring defaults.
Review recent sonar history by moving cursor left.
Transducer transmits modulated pulses across a range of frequencies.
Covers Noise Rejection, Surface Clarity, Color, Amplitude Scope, and Fish ID.
Restricts digital depth capability to a selected range.
Enhances performance with preset sonar settings for specific fishing conditions.
Accounts for transducer-to-keel distance for accurate depth readings.
Covers water speed, reset water distance, transducer type, and temperature calibration.
Accesses DSI menu options like range, contrast, and ping speed.
Review sonar history by pressing the keypad left.
Adjust contrast for clarity and set display range or custom limits.
Includes Noise Rejection, Surface Clarity, Color, and Split Zoom.
Adjusts unit settings like language, mute audio, and advanced mode.
Enables features and settings only available with unit in Advanced Mode.
Configure alarms and select measurement units (e.g., miles, feet).
Configure NMEA 0183 and NMEA 2000 connections for data sharing.
Covers max depth, transducer frequency, max speed, and transducer cable.
To Next Page