Need help?Do you have a question about the Lowrance Mark 5x Pro and is the answer not in the manual?
Covers transducer and display unit installation, including power connection.
Details choosing a proper location for the transducer on the boat hull for optimal performance.
Explains how to align the transducer bracket using ratchets for correct parallel installation.
Describes the process of loosely assembling the transducer and bracket after alignment.
Details the steps for physically attaching the transducer bracket to the boat's transom.
Provides guidance on how to properly route the transducer cable, ensuring sufficient slack.
Explains how to perform a test run to verify the transducer installation and functionality.
Covers specific installation methods for shoot-thru-hull transducer types.
Details the installation of transducers using a trolling motor bracket accessory.
Provides instructions on how to mount the main display unit using its bracket.
Explains how to correctly connect the unit to the boat's electrical power system.
Identifies and explains the functions of the unit's buttons and screen elements.
Introduces the four main page screens available: Sonar, Split Zoom, Split Frequency, Split Flasher.
Covers essential initial operations like turning the unit on/off and adjusting backlight.
Explains the Sonar display, showing the water column moving right to left.
Details the Split Zoom view with a 2X zoom in the left panel.
Describes the Split Frequency display showing 83 kHz and 200 kHz views.
Explains the Split Flasher view with a sonar flasher in the left panel.
Guides users on how to navigate through different pages and menu options.
Explains how to interact with menu elements like scrollbars and dropdowns.
Provides instructions on how to input text using the unit's on-screen keyboard.
Describes the process of closing or exiting menus and dialogs.
Details the available fishing modes and their associated sonar settings.
Explains how to reset all unit options and settings to their factory defaults.
Lists and describes advanced features and settings available in the unit.
Details how to put the unit into a low-power sleep mode and resume operation.
Introduces how to use the sonar feature and make basic adjustments.
Explains how to review past sonar data for Mark 5X Pro & Elite 5x models.
Describes the various settings and options available within the Sonar menu.
Covers making adjustments to Sensitivity for optimal sonar display detail.
Details how Colorline separates echoes to distinguish fish and structure.
Describes the Auto Sensitivity feature for automatic adjustment of sensitivity levels.
Explains how to select the portion of the water column displayed.
Details setting custom upper and lower limits for the depth range.
Covers selecting the transducer frequency (83kHz or 200kHz).
Explains how Ping Speed affects the rate of sonar waves sent into the water.
Describes switching between full screen sonar and split screen views.
Explains how to change the display's color palettes for different visual effects.
Allows viewing the amplitude of real-time echoes before they appear on the main display.
Explains how to display fish echoes as symbols instead of arches.
Describes how to pause the sonar chart for a closer look at echoes.
Guides on selecting, configuring, and customizing data overlays on the sonar screen.
Explains how to toggle the visibility of the overlay data display.
Introduces the main menu for unit configuration and settings adjustments.
Covers adjustments for language, mute audio, advanced mode, and restore defaults.
Explains how to select the language for menus and text.
Displays software information and details about the unit.
Controls sonar options and display settings like Noise Rejection and Fishing Mode.
Explains how Noise Rejection reduces interference and onscreen clutter.
Details how Surface Clarity reduces clutter near the surface by decreasing sensitivity.
Describes sending sonar signals only to a selected depth range for focused fish searching.
Guides on selecting preset sonar settings for specific fishing conditions.
Resets the Fishing Mode to the default General Use setting.
Accesses menu for Keel Offset, Water Speed, and Temp calibration.
Explains how to measure and input keel offset for accurate depth readings.
Details calibrating temperature sensor data for accuracy.
Resets the water distance value to zero.
Enables alarms and sets thresholds for Shallow and Fish alarms.
Allows selection of units for Distance, Speed, Depth, and Temperature.
Used to simulate sonar activity for practice or demonstration purposes.
Lists general physical and display specifications for the unit.
Details sonar-related specifications like max depth, frequency, and transducer type.
Outlines the procedure for obtaining warranty service and support.
Lists conditions and situations not covered by the product warranty.
Provides contact details for obtaining technical support and service in the US and Canada.
Details how and where to order accessories for the unit.
Covers transducer and display unit installation, including power connection.
Details choosing a proper location for the transducer on the boat hull for optimal performance.
Explains how to align the transducer bracket using ratchets for correct parallel installation.
Describes the process of loosely assembling the transducer and bracket after alignment.
Details the steps for physically attaching the transducer bracket to the boat's transom.
Provides guidance on how to properly route the transducer cable, ensuring sufficient slack.
Explains how to perform a test run to verify the transducer installation and functionality.
Covers specific installation methods for shoot-thru-hull transducer types.
Details the installation of transducers using a trolling motor bracket accessory.
Provides instructions on how to mount the main display unit using its bracket.
Explains how to correctly connect the unit to the boat's electrical power system.
Identifies and explains the functions of the unit's buttons and screen elements.
Introduces the four main page screens available: Sonar, Split Zoom, Split Frequency, Split Flasher.
Covers essential initial operations like turning the unit on/off and adjusting backlight.
Explains the Sonar display, showing the water column moving right to left.
Details the Split Zoom view with a 2X zoom in the left panel.
Describes the Split Frequency display showing 83 kHz and 200 kHz views.
Explains the Split Flasher view with a sonar flasher in the left panel.
Guides users on how to navigate through different pages and menu options.
Explains how to interact with menu elements like scrollbars and dropdowns.
Provides instructions on how to input text using the unit's on-screen keyboard.
Describes the process of closing or exiting menus and dialogs.
Details the available fishing modes and their associated sonar settings.
Explains how to reset all unit options and settings to their factory defaults.
Lists and describes advanced features and settings available in the unit.
Details how to put the unit into a low-power sleep mode and resume operation.
Introduces how to use the sonar feature and make basic adjustments.
Explains how to review past sonar data for Mark 5X Pro & Elite 5x models.
Describes the various settings and options available within the Sonar menu.
Covers making adjustments to Sensitivity for optimal sonar display detail.
Details how Colorline separates echoes to distinguish fish and structure.
Describes the Auto Sensitivity feature for automatic adjustment of sensitivity levels.
Explains how to select the portion of the water column displayed.
Details setting custom upper and lower limits for the depth range.
Covers selecting the transducer frequency (83kHz or 200kHz).
Explains how Ping Speed affects the rate of sonar waves sent into the water.
Describes switching between full screen sonar and split screen views.
Explains how to change the display's color palettes for different visual effects.
Allows viewing the amplitude of real-time echoes before they appear on the main display.
Explains how to display fish echoes as symbols instead of arches.
Describes how to pause the sonar chart for a closer look at echoes.
Guides on selecting, configuring, and customizing data overlays on the sonar screen.
Explains how to toggle the visibility of the overlay data display.
Introduces the main menu for unit configuration and settings adjustments.
Covers adjustments for language, mute audio, advanced mode, and restore defaults.
Explains how to select the language for menus and text.
Displays software information and details about the unit.
Controls sonar options and display settings like Noise Rejection and Fishing Mode.
Explains how Noise Rejection reduces interference and onscreen clutter.
Details how Surface Clarity reduces clutter near the surface by decreasing sensitivity.
Describes sending sonar signals only to a selected depth range for focused fish searching.
Guides on selecting preset sonar settings for specific fishing conditions.
Resets the Fishing Mode to the default General Use setting.
Accesses menu for Keel Offset, Water Speed, and Temp calibration.
Explains how to measure and input keel offset for accurate depth readings.
Details calibrating temperature sensor data for accuracy.
Resets the water distance value to zero.
Enables alarms and sets thresholds for Shallow and Fish alarms.
Allows selection of units for Distance, Speed, Depth, and Temperature.
Used to simulate sonar activity for practice or demonstration purposes.
Lists general physical and display specifications for the unit.
Details sonar-related specifications like max depth, frequency, and transducer type.
Outlines the procedure for obtaining warranty service and support.
Lists conditions and situations not covered by the product warranty.
Provides contact details for obtaining technical support and service in the US and Canada.
Details how and where to order accessories for the unit.
To Next Page
General