Need help?Do you have a question about the Lowrance Mark-4 and is the answer not in the manual?
Covers powering on/off, Man Overboard, backlight, audio, and GPS source selection.
Initial configuration process for setting up the unit for first use.
Descriptions of Downscan, Sonar, and Chart display types.
Utilizing preset sonar configurations for different fishing conditions.
Enabling enhanced features and settings for more experienced users.
Detailed explanation of the DownScan sonar display.
In-depth look at the real-time map display.
Displaying additional data on sonar, structure, and chart screens.
Selecting data sources, adding/removing data, and adjusting positions.
Introduction to the unit's sonar capabilities and types.
Understanding and using CHIRP sonar for better imaging.
Reviewing recent sonar history by moving the cursor.
Accessing the main menu for sonar settings and options.
Selecting the maximum depth displayed on the sonar screen.
Selecting the operating frequency for the transducer.
Detailed explanation of available sonar frequencies and their benefits.
Accessing and configuring sonar settings.
Restricting depth search for advanced users.
Configuring installation parameters including keel offset and transducer type.
Features and operation specific to DownScan sonar.
Accessing DownScan menus and reviewing past data.
Overview of the chart plotting and navigation features.
Creating, editing, and managing navigation data.
Building a route using existing saved waypoints.
Creating a route by placing points directly on the chart.
Following a created route forward or in reverse.
Overview of settings categories for unit configuration.
To Next Page
General