Need help?Do you have a question about the Lowrance Mark-5x DSI and is the answer not in the manual?
General| Display Size | 5 inches |
|---|---|
| Display Resolution | 480 x 480 pixels |
| Sonar Type | DownScan Imaging |
| Frequency | 455/800 kHz |
| Waterproof Standard | IPX7 |
| Voltage | 12V DC |
| Operating Temperature | -15°C to 55°C |
| Power Output | 500 watts (RMS) |
| Dimensions | 6.9" x 5.4" x 2.5" (175 mm x 136 mm x 63 mm) |
Covers the installation of the transducer and display unit, including connecting power and mounting.
Explains how to select an optimal location for the transducer for proper function.
Details the process of aligning the transducer bracket using ratchets for proper positioning.
Describes the steps for securely attaching the transducer assembly to the boat's transom.
Guides on performing a test run to ensure the transducer is installed correctly.
Provides specific instructions for installing transducers through the boat hull, noting precautions.
Details how to mount transducers on a trolling motor using specific brackets or straps.
Explains how to mount the display unit, including bracket placement and drilling pilot holes.
Outlines the steps for connecting the unit to the boat's power supply.
Explains the function of each key and button and identifies elements on the sonar display.
Covers basic startup, adjusting screen brightness, and muting audio for initial use.
Details the four main page screens: Sonar, Split Zoom, Split Frequency, and Split Flasher.
Illustrates how to navigate and access different pages and the sonar menu.
Explains how to use scrollbars, on/off features, dropdown menus, and input text.
Describes how to exit menus and the purpose of different fishing modes.
Covers resetting settings, standby mode, and enabling advanced features.
Provides instructions for using sonar features and viewing sonar history.
Details how to adjust sensitivity, colorline, and use auto sensitivity.
Explains depth range selection, transducer frequency, and accessing sonar options.
Describes display modes like Split Zoom, Color, Amplitude Scope, Fish ID, and Stop Sonar.
Details how to select, configure, and customize overlay data on the sonar screen.
Introduces the settings menu and covers system options like language and about.
Explains sonar settings including noise rejection, surface clarity, and fishing modes.
Details how to set keel offset and calibrate temperature readings for accuracy.
Covers setting alarms, selecting measurement units, and using the simulator.
Presents technical specifications for the unit, including case size, display, power, and sonar.
Outlines warranty terms, conditions, and procedures for obtaining service.
Details warranty exclusions and limitations regarding product use and jurisdiction.
To Next Page
