Need help?Do you have a question about the Lowrance LCF-1440 and is the answer not in the manual?
Lists general and sonar specifications for the LCF-1440 unit.
Describes mounting location requirements and necessary clearance behind the dash.
Lists the tools and materials required for installation.
Details the process of physically installing the sonar unit onto a dash.
Instructions for connecting and placing the unit's speaker.
Explains how to connect the unit to a 12-volt power source, including fuse use.
Guidance on transducer types and their installation.
Explains the function of each button on the LCF-1440 keyboard.
Describes which user settings are saved in the unit's permanent memory.
Overview of how to navigate through the unit's menus and features.
Describes the initial screen displayed after the unit is turned on.
How to manually adjust or use the automatic depth range.
How to adjust the unit's sensitivity to improve echo detection.
Explains how Grayline differentiates signal strengths, like bottom hardness.
How to configure the fish alarm to sound when fish symbols appear.
How to set shallow and deep alarms based on bottom depth.
How to use the Advanced Signal Processing for noise reduction.
How to turn the water temperature display on or off.
How to change the unit of depth measurement (feet or meters).
How to turn the display backlight on or off.
How to adjust the screen's contrast for visibility.
How to enable or disable the audible key press tones.
How to activate the built-in simulator for practice.
How to view the unit's operating software system information.
To Next Page
General
