Need help?Do you have a question about the Lowrance M52 S/GPS and is the answer not in the manual?
General| Display | Monochrome LCD |
|---|---|
| GPS Type | Internal |
| Channels | 12 |
| Routes | 100 |
| Waterproof | Yes |
| Waterproof Rating | IPX7 |
| Power Supply | 10-17 vDC |
| Weight | 1.5 lbs |
| Waypoints | 1000 |
| Display Size | 5 inches |
| GPS Receiver | 12 parallel channel GPS+WAAS receiver |
Guides through the process of installing the sonar transducer on various boat hull types.
Step-by-step guide for assembling and mounting the transducer on a transom.
Guides on properly connecting the unit's power and transducer cables.
Provides instructions for in-dash and bracket mounting of the sonar unit.
A simplified, step-by-step guide for common fish-finding operations.
Explains the noise rejection feature and its various settings for optimizing display quality.
Details the different sonar alarms (Fish, Zone, Depth) and how to configure them.
Adjusts the unit's ability to detect echoes, managing detail versus clutter.
Steps to diagnose and resolve issues when the unit fails to power on.
Explains how to exit demo mode by ensuring proper transducer/antenna connection.
Addresses issues causing the unit to become unresponsive or behave unexpectedly.
Troubleshoots problems with bottom signal detection and fish detection.
Diagnoses issues related to bottom echo loss or erratic readings during boat movement.
Provides solutions for not seeing fish arches when Fish I.D. is disabled.
Identifies and resolves problems caused by electrical or mechanical noise interference.
Details satellite acquisition status, fix quality, and positional accuracy indicators.
Displays compass rose, track, bearing, and navigation data to waypoints.
Displays track, course, and waypoint information in a bird's-eye view.
A concise, step-by-step guide to performing basic GPS operations.
Covers navigation commands, finding positions, distances, waypoints, trails, icons, and routes.
How to set and manage GPS alarms like arrival, off-course, and anchor alarms.
Explains how the unit automatically searches for and locks onto satellites for positioning.
Enables practicing GPS operations and navigation without actual satellite signals.
Restores all unit settings to their original factory defaults.
To Next Page