Basic Paging Operations
After all components have been charged the system is ready for use. The following de-
scribes the basic operation of the T9550.
Paging Staff Pagers (for units set for staff paging)
1. Enter the pager number
2. Press MSG button (MSG 1= pager indicator 1, MSG 2 = indicator 2, MSG 3 = indi-
cator 3, or MSG 4 = indicator 4).
Paging Guest Coasters and Paddles (for units set for guest paging)
1. Enter the pager number
2. Press MSG button
• MSG 1 causes guest pager to flash/vibrate for 30-seconds
• MSG 2 causes guest pager to flash/vibrate for 5-minutes
• MSG 3 causes guest pager to flash/vibrate, and beep for 5-minutes
• MSG 4 causes guest pager to glow mode for 5-minutes
Page All Call
If all staff pagers need to be called simultaneously:
1. Press 0 - 0 - 0
2. Press a message key
Long Range Systems 4 T9550 LCM User Manual
To Next Page
Loading...
