LS tractor MT347 User Manual

3 -55
Down speed control knob
Fast
Slow & Lock
④ Down speed control knob (Roll-bar
type)
 It is use to adjust the down speed of the 3-point
linkage. Turn the down-speed control knob to
the right direction for slower down speed, and to
the left direction for faster down speed.
 If turning the knob right direction fully, the
implement will be fixed and even if lowering
down the position control lever, the implement
does not let down.
- Tiller: Slow in down speed
- Plough: Fast in down speed
 When working in hard ground, slow down the
down speed to avoid bounding of the implement.
▶When driving on the road, replacing tiller blades or removing grass around the tiller
blades, turn the down-speed control knob clockwise slightly to lock.
▶The knob rotates about two revolutions. Do not over-tighten the knob. It may cause
damage to the control valve and connection parts.
Warning

LS tractor MT347 Specifications

General

Engine Power	47 hp
Engine Type	Diesel
Brakes	Wet Disc
Hydraulic System Type	Open Center
Rear PTO Speed	540 rpm
Number of Cylinders	4
Steering	Power steering
3-Point Hitch	Category I
Rated Speed	2600 rpm