LS tractor XG3025 - Page 93

4 -29
(10) Recommended Maximum Specification of Implements
z When attaching implements to the tractor, refer to the followings recommended as maximum
specification of each implement. DO NOT attach bigger implements than this specification. For other
implements, contact your authorized local dealer.
No. Implements Specification XG3025 / XG3025H
1
Trailer
(with 4-wheel)
Max vertical load See section 4-4-(3) in this manual
2
Trailer
(with 2-wheel)
Max vertical load See section 4-4-(3) in this manual
3 Mid mower Max cutting width
1676 mm
(66 in.)
4
Rear mounted
mower
Max cutting width
1676 mm
(66 in.)
5 Flail Mower Max cutting width
1524 mm
(60 in.)
6 Sickle Bar Max cutting width
1676 mm
(66 in.)
7
Rear mounted
Sprayer
Max tank capacity
250 kg
(551 lb)
8 Pull type Sprayer Max tank capacity
1400~1690kg
(2800~3380 lb)
9 Rotary Tiller Max tilling width
1520 mm
(59 in)
10 Bottom Plow Max size
1110 mm
(43 in.)
11
Disk harrow
(pull type)
Max working width -
12 Manure Spreader Max volume
1400~1690 kg
(2800~3380 lb)
13 Front blade Max working width
1660 mm
(65 in.)
14 Rear blade Max working width
1524 mm
(60 in.)
15 Front loader
Max lift capacity
(Bucket pivot point)
743 kg
(1640 lb)
16 Landscape Rake Max working width
1524mm
(60 in.)
17 Box blade Max working width
1400 mm
(55 in.)
18 Backhoe
Max weight
(W/O Bucket)
470 kg
(1036 lbs)
19 Snow Blade Max. width
1524 mm
(60 in.)
20 Snow Blower Max. working width
1524 mm
(60 in.)