TROUBLE SHOOTING
cylinder rod bend when lift
cylinders extended.
Hydraulic pump capacity
inadequate.
Low hydraulic fluid supply.
Refer to Tractor Operator's Manual for
recommended service procedures. Replace
hydraulic pump if determined to be defective.
Hydraulic pump defective.
Excessive shock load on lift
cylinders during transport.
Replace defective parts. Review and observe
proper and safe operational practices.
Refer to Tractor Operator's Manual for service
recommendations.
Hydraulic hose restriction.
Check for evidence of restriction in hydraulic
hoses.
Cold hydraulic fluid
Allow hydraulic fluid to warm up to operating
temperature.
Engine R.P.M. too slow. Increase engine R.P.M.
PROBLEM POSSIBLE CAUSE CORRECTION
- 42 -
To Next Page
Loading...
Need help?
General
