LOADER INSTALLATION
◈ Position the loader on a hard level surface. The more level the surface the easier the loader is to install.
▶ IMPORTANT: Do not tighten any hardware until all components are attached onto the tractor.
CAUTION: Lift and support all loader components safely.
▶ Using a hoist, install Mounting Frame LH/RH.
(1) Mounting Frame LH-1EA
(2) Mounting Frame RH-1EA
(3) BACK AXLE -1EA
(4) UNDER PLATE-1EA
(5) BRACKET ASSY-1EA
(6) BOLT, M10x45L-2EA
(7) SPRING WASHER, M10-4EA
(8) PLAIN WASHER, M10-2EA
(9) BOLT, M10x40Lx1.5P-2EA
(10) NUT, M10-2EA
(11) PLAIN WASHER, M12-4EA
(12) BOLT, M12x40L-2EA
(13) SPRING WASHER, M12-4EA
(14) NUT, M12-2EA
(15) BOLT, M12x50L-2EA
(16) SPRING WASHER, M14-20EA
(17) BOLT, M14x35L-6EA
(18) BOLT, M14x45L-4EA
(19) NUT, M14-6EA
(20) BOLT, M14x55L-2EA
(21) BOLT, M14x60L-4EA
(22) BOLT, M14x90L-4EA
To Next Page
Loading...
