LS XR4040 User Manual

Contents
1. General Notices for Safety
1-1. Before using the tractor ······································1-1
1-2. Safety Precautions (Read this for safety before using)
(1) Notices before using the tractor ·································1-4
(2) Notices when starting Engine ··································1-7
(3) Notices while operating/using the tractor · · · · · · ····················1-8
(4) Notices when connecting Implement ····························1-10
(5) Notices when towing the tractor ································1-11
(6) Notices when transporting the tractor ···························1-11
(7) Notices when servicing the tractor after work ·····················1-12
(8) Notices when handling Diesel Fuel ····························1-13
(9) Notices when leaving the tractor · · ····························1-14
(10) Notice relating to Toxic substances ····························1-14
1-3. Long-term storage
(1) Preparation for storage · · · ···································1-15
(2) Check & Maintenance during storage · · · ························1-16
(3) Preparation for Reuse · · · ···································1-16
1-4. Notices for “Use & Disposal” related to the environment ·········1-17
1-5. Symbols ··················································1-18
1-6. Safety Decals
(1) Handling and Maintenance of Safety Decals · · · ···················1-19
(2) Safety Decals and attaching position · · · · · · · · · ···················1-19
2. Instruction for safe operation
(1) The name of each part ·······································2-1
2-1. Boarding and Exiting the tractor
(1) Boarding the tractor ·········································2-3
(2) Seat adjustment ·············································2-4
(3) Tilting steering wheel ·········································2-4
(4) Seat belt ···················································2-5
(5) Ventilation (Cabin only) ·······································2-5
(6) Exiting the tractor ···········································2-6
2-2. Safety device
(1) Hood (Bonnet) · · · · ·········································2-7
(2) Fender ···············································2-7
(3) PTO Safety cover and protection cap ····························2-7
(4) Roll-Over Protective Structure (ROPS) ···························2-8

LS XR4040 Specifications

General

Engine HP	40 HP
Drive	4WD
Transmission	Hydrostatic
Rear Tire	13.6-24
3-Point Hitch	Category I
Cylinders	4
Fuel Tank Capacity	9.5 gal (36 L)
Hydraulic System Type	Open Center
PTO Speed	540 RPM
Length	122.4 in (3, 110 mm)
Ground Clearance	13.4 in (34 cm)

Summary

General Notices for Safety

Before using the tractor

Crucial instructions and precautions before operating the tractor.

Safety Precautions

Essential safety measures covering operation, maintenance, and handling.

Safety Decals

Information on the location, handling, and importance of safety decals.

Instruction for safe operation

Boarding and Exiting the tractor

Safety device

Description of protective features like the hood, fender, PTO covers, and ROPS.

Instruments and Controls

Instrument Panel and Front controls

Identification and function of dashboard indicators and front-mounted controls.

Right-hand controls and Cabin pillar (Cabin type)

Controls located on the right side and cabin pillar for cabin type tractors.

Left-hand controls (Cabin type)

Left / Right-hand controls (Roll-bar type)

Hydraulic system

Details on safety, components, and diagrams of the tractor's hydraulic system.

Operation and Work

Engine start and stop

Step-by-step procedures for starting and stopping the tractor engine.

How to drive and how to stop

Guidance on operating the tractor, including changing speed and emergency stops.

Attaching equipment

Driving speed

Lubrication and Maintenance

Maintenance chart

Lubricants and Capacity

First 50 hour check

Check before starting (Daily check)

Essential daily checks covering engine oil, fuel, instruments, lights, and tire condition.

Every 50 hour check

Every 250 hour check

Every 500 hour check

Every 2-year check

Troubleshooting

A guide to diagnosing and resolving common faults related to the engine, clutch, brake, and hydraulic systems.