4 -8
1. Press the clutch and brake pedals. Place
the shuttle lever, main gear shift lever in
NEUTRAL and PTO switch to OFF position.
3. Apply parking brake and release the brake
pedals and clutch pedal slowly.
2. Push the position control lever forward to
lower implements to the ground. Turn key
switch to OFF position.
(4) Stopping tractor
Caution
▶ DO NOT keep apart from the tractor in the state that the transmission gear is
placed in NEUTRAL and the parking brake is not applied. The tractor may roll.
Apply the parking brake at all times before leaving the tractor.
▶ Remove the ignition key always after stopping engine.
Mechanical type
Throttle lever
Key switch
PTO switch
1. Release the HST forward/reverse pedal
slowly and pull the throttle lever backward to
reduce the engine speed, and place the range
gear shift lever in NEUTRAL and PTO switch
to OFF.
3. Apply parking brake and release the brake
pedals slowly.
2. Push the position control lever forward to
lower implements to the ground. Turn key
switch to OFF position..
HST Type
Brake pedals
Clutch pedal
Throttle lever
Key switch
Cabin
Parking brake lever
Roll-bar
To Next Page
Loading...
