4 -6
(2) Changing speed
z Depress the clutch pedal fully and operate all the
shift levers correctly.
z Before shifting range gear shift lever, FR shuttle
lever, creeper lever (if fitted), Have to stop the
tractor completely.
Mechanical type
HST type
z Just pressing the HST forward / reverse pedal
respectively makes it possible to travel forward
and in reverse. Moving (forward / reverse),
neutral and changing speed can be controlled by
these pedals.
z The range gear shift lever must be operated in
the neutral state of the pedal, and after tractor
has stopped completely.
z Set driving speed properly depending on the road
condition.
HST forward pedal
Throttle lever
HST reverse pedal
Clutch pedal
To Next Page
Loading...
