3 -29
(6) Range gear shift lever
(Mechanical only)
z Four speed gear shift is available.
z Before operating range gear shift lever, HAVE
TO STOP the tractor completely.
Range gear
shift lever
Mechanical
Notice
▶ Operate range gear shift lever correctly. If operated diagonally, it may cause a
failure.
(7) PTO gear lever (if fitted)
z 540 / 750 / 1000 rev/min and neutral position is
available.
z Before operating the lever, press the clutch
pedal and put PTO switch to OFF position, and
stop the PTO shaft completely.
PTO gear
lever
▶If the PTO gear lever is NOT engaged smoothly, lift up and down on implement to
align the drive shaft.
Caution
1000rpm
750rpm
540rpm
Neutral
(5) Work light switch
① Rear work light
z Rear work light has a switch on its back. To turn
on/off the rear work light, operate the switch as
the right figure.
ON
OFF
▶When driving on the road at night, do not let the front / rear work lights stay ON. It
may cause a disturbance to the driver of the following car.
Caution
2
1
N
3
4
To Next Page
Loading...
