EasyManua.ls Logo

LS XR4040 - Check before starting (Daily check)

LS XR4040
158 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5 -9
z Check the following check points before using to avoid a failure.
5-6. Check before starting (Daily check)
Wheel bolts and
tightening of
each part
Brake, Clutch
operation
Amount of
engine coolant
Damage of Headlights,
Turn signal lights,
Horn etc.
Fuel
amount
Cleanness of
radiator screen
Amount of
Engine oil
Operation
of Indicators
Tire air pressure
and damage
Condition of air
cleaner primary
element
z Checking oil level
- Check oil level before starting engine or at 5
minutes later after stopping engine.
- Check If the oil is between MAX and MIN mark
of the oil gauge. If necessary, add new oil.
- It must only be performed while the engine is
stopped.
(1) Engine oil
z Oil capacity : 5.7 L ( 1.5 U.S.gals. )
z Using Engine oil
- Diesel engine oil ; API CJ-4.
Select engine oil according to the temperature
as shown in the right table.
Temperature Lubricant No.
Below -10
(Below 14)
SAE 5W-30
-10 ~ 40
(14 ~ 104)
SAE 10W-30
Above 40
(Above 104)
SAE 15W-40

Table of Contents

Related product manuals